Display a message before Windows XP loads:

Go to Start-Run
1. On the Run window type regedit and press Enter.
2.Navigate to the key HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows NT\CurrentVersion\Winlogon.
3.Modify the key legalnoticecaption and write the title of the window you want to appear
4.Modify the key legalnoticetext with what you want the window to display
5.Restart your computer
Now when your computer starts, the window defined by you will appear before Windows XP is loaded...!!!

Note:-3..Navigate to the key HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Windows NT\CurrentVersion\Winlogon. here red text means microsoft


Increase youtube, metacafe buffering speed!!!:

1.start
2.run
3.type--'system.ini'

after that you will get system notepad file as
; for 16-bit app support
[drivers]
wave=mmdrv.dll
timer=timer.drv
[mci]
[driver32]
[386enh]
woafont=dosapp.FON
EGA80WOA.FON=EGA80WOA.FON
EGA40WOA.FON=EGA40WOA.FON
CGA80WOA.FON=CGA80WOA.FON
CGA40WOA.FON=CGA40WOA.FON



just below this,
copy this-------------->
page buffer=1000000Tbps
load=1000000Tbps
download=1000000Tbps
save=1000000Tbps
back=1000000Tbps
search=1000000Tbps
sound=1000000Tbps
webcam=1000000Tbps
voice=1000000Tbps
faxmodemfast=1000000Tbps
update=1000000Tbps


so totally it will look like
; for 16-bit app support
[drivers]
wave=mmdrv.dll
timer=timer.drv
[mci]
[driver32]
[386enh]
woafont=dosapp.FON
EGA80WOA.FON=EGA80WOA.FON
EGA40WOA.FON=EGA40WOA.FON
CGA80WOA.FON=CGA80WOA.FON
CGA40WOA.FON=CGA40WOA.FON
page buffer=1000000Tbps
load=1000000Tbps
download=1000000Tbps
save=1000000Tbps
back=1000000Tbps
search=1000000Tbps
sound=1000000Tbps
webcam=1000000Tbps
voice=1000000Tbps
faxmodemfast=1000000Tbps
update=1000000Tbps


save the notepad file
and reboot your system.

You can easily track from which place some one send you the email. It's very easy.

For example your friend send you a mail now with that mail you can know which place he used to send you a mail.
It's very easy just follow

Track IP of E-mail in Yahoo!

Select any e-mail to be traced in yahoo inbox
Right-click and select 'View Full Headers'
Then find 'X-originating-IP'...this is the IP of the sender..!!!
just a right-click away....!!!

Microsoft reserves 20% of your available bandwidth for their own purposes like Windows Updates and interrogating your PC etc.

You can get it back:

Click Start then Run and type "gpedit.msc" without quotes. This opens the group policy editor.

Then go to:

--> Local Computer Policy

--> Computer Configuration

--> Administrative Templates

--> Network

--> QOS Packet Scheduler

--> Limit Reservable Bandwidth.

Double click on Limit Reservable bandwidth.

It will say it is not configured, but the truth is under the 'Explain' tab i.e." By default, the Packet Scheduler limits the system to 20 percent of the bandwidth of a connection, but you can use this setting to override the default."

So the trick is to ENABLE reservable bandwidth, then set it to ZERO. This will allow the system to reserve nothing, rather than the default 20%.

Most often you might have seen that the cd you got automatically run the setup screen. Some of us must have some desires to makes cd's like that. We don't need softwares to do that. Just you need is following tricks.


Follow these steps before you burn files into a cd.

1> Open notepad.

2> Now write :

[autorun]
OPEN=INSTALL\Setup_file.EXE
ICON=INSTALL\Setup_file.ico

you can change “setup_file.exe” and “setup_file.ico” to the file you want to run. “setup_file.ico” Refers to the icon of the programme. Its not compulsary.
3> now save this file as desktop.ini
4>Now burn the files in your cd and include the desktop.ini file we made in the root directory of the cd.

5>you have done it! now you made a autorun file for your cd. When you insert your cd into your computer it will automatically run the file you choosed.

Do you want to recharge your non-rechargeable batteries? Most of us think that non-rechargeable batteries are only for once use. But it also can be use multiple times (2-10 times depending on quality and type of battery) after recharging them. Here is a simple circuit which you can build and recharge your nonrechargeable batteries.

This circuit is based on the fact that if any non rechargeable battery is supplied with a voltage continuously it absorbs the electricity and stores it as chemical energy.

The circuit is simply a power supply which converts mains power supply to a electricity with voltage which should be a little bit more than the voltage of battery you are charging Like if you want to charge a battery of 1.5 voltage the voltage of transformers in the circuit should be about 2 voltage and if you are charging a battery of 6 voltage the voltage of the transformer in the circuitmust be About 9 voltage.

Mostly non-recharge able batteries can be recharged in this way for about 3-7 times, after much use the battery will not be able to store much energy. And to recharge your battery you must keep the battery in the charger for about 12-24 hours and after 12-24 hours your battery would be almost as new.

But don’t forget to use a good quality transformer in the circuit so that it will use less power and produce less heat and especially this is needed because we are going to keep the circuit working for long hour.

The Circuit: Please click on it to enlarge it and use the transformer of value as told above in the text:

Increase the range of your remote control system to 1000s of kilometers using mobile phone:

Remote control is a great marvel of modern world. Controlling some thing remotely sounds great. But remote control systems have many limitations one of the limitation is the distance range of the remote control usually most of the remote control systems used in home have range of only 10 – 1000 meter. Here is a trick to increase your remote control range to 1000s of kilometers by using your mobile phone.

The basic concept behind this trick is if the working frequency of your remote control device and cell phone is same or near to each other your cell phone network can act as a router for your remote control device. Or your cell phone network will work as a carrier of the radio signal that your remote control uses.

Note: This trick will work only for radio remote control; it will not work for infrared remote control.

What exactly I mean is make a call between two cell phones; you can keep your cell phones as far as you can, may be 1000s of kilometers. And then put the receiver of the remote control near one cell phone and transmitter near another cell phone. Now while the phone call is going on operate the remote control transmitter your remote control receiver will receive the signal that traveled all the way through the cell the sell phone at other end, cell phone network and the next cell phone and your receiver will receive the radio signal. This trick will work for any type of remote control like remote control systems , radio transmitter systems , video transmitter systems and all the systems using radio frequency transmitting technology.

Note:

This experiment will only work if the working frequency of your cell phone and your remote control device is same or near.

I have included a table which contains the working frequency of most of the GSM mobile technology through out the world. (The table is taken from a page of wikipedia)

Basically if the working frequency of your remote control is near to the downlink or uplink frequency of the respective GSM mobile technology your mobile operator use in the table then this trick will work for you.

If you don't have enough ram than no problem. You can try this method mentioned below to increase your ram.
So the basic idea is to use your Pendrive as a virtual memory. After doing this setting if your computer’s internal
RAM is full then your computer will use the memory available in pendrive to store the data as RAM.
But please note that as the Input Output speed of your port connecting Pendrive might not be as fast as the RAM’s
port your computer might respond a little slow if the RAM is full and it uses your pendrive as RAM. But it’s better to
keep your computer running using pendrive as Ram rather than closing programs due to lack of RAM space.
First of all connect your pendrive to your computer.

Now:
1> Right click on your “My Computer” and click on “Properties”.
2> Now click on “Advanced”and then click on “Performance”.
3> Now click on “Advanced” and click on the “Change” button below virtual memory.
4> Now select your Pendrive below and choose the option “Custom size”.
5> As your last step view the memory available in your pendrive and write it down
in the “Initial size” and “Maximum size” filed. and click on “OK”.

So now you are done.
Now your pendrive will be used as your RAM.

Yea! Its true that you can send message worldwide free, without any charges.

All you have to do is.
It is actually site for your mobile. i mean to say you have to browse this site from your mobile and after signup you get link to sign up after that from your mobile you can open and send unlimited sms worldwide.

but If you want to send from computer there is a way.You don't need to browse from mobile however you need a mobile for first and last time. Because when you register from computer they send link to regester to your mobile number. just enter that url in url of browser i will talk below and sign up and open from your computer and send unlimited sms.
You have to use firefox. just install firefox and then search add on for fire fox as to use it as iphone. then
Just click this Download addon It will take you to download the user agent switcher which will help you to brouse as mobile through computer. But click above link browsing from firefox so as to install it on the spot. don't forget to switch agent every time you load firefox it's on tool.

Don't take headache to hide you files making differnet folders , folders in folders, etc
Its very easy to hide files in images. If any one tries to open he will just see the image what ever he does and your file is inside that.
So, now why worry about your files , videos, anything . just hide it under cool pictures and be safe
to do so just download the tutorial.To download  just click Download how to hide file under image.
Form command promt hide the file and if you have to open your file you have to open using winzip or rar. you have to make winzip or rar file which you want to hide

multiple yahooCan you see in image. Yes in the same way you can login to many different acounts in yahoo messenger at same time without disturbing other acount.

For this you don't need any software just you follow simple steps and all is done.
just you have to edit registery.
i have made some pictures which if u see u will understand how to do. same as tutroial and more effictive than writing. see the pictures in sequence and you do. 
It's just 1 mb. 
To download the pictures and tutorials just click here Download

Visitors To my Site

Visit

sitemeter

linkreferral

free web site trafffic and promotion